KMG - Group

SINGLE PANELS

	Single Panel This panel is perfect for walls, partitions, claddings, floors and roofing of buildings, both civil and industrial. Used as a load-bearing structure, for four storey buildings, with application of structural plaster on both sides, for partitions and claddings in buildings, either new or to be renovated; as a curtain wall and partition in large-sized industrial and commercial buildings; as an insulating disposable form for roofing and floors of reduced span, prepared with or without pre-installed ribs.

	Cladding Coat Single Panel Insulating panel for the cladding coat of existing walls. It provides greater insulation and interior comfort for the buildings, enabling excellent energy and cost savings. With the Cladding Coat Single Panel it is easy to re-establish the right thermal insulation inside existing buildings, totally eliminating the heat bridges.

	"HP" Single Panel Panel created to face with particular building requirements. This is a special panel whose characteristic is the application of a double electrowelded mesh on each side, and its high structurality gives a remarkable resistance to the horizontal actions, both static and dynamic.
Single Panels with supplementary insulating materials In order to meet with the various requirements, it is possible to ask for the supply of single panels with different supplementary insulating materials such as cork, rock wool or lead foil.

	Double panel Insulating double panel, excellent for reinforced concrete walls such as load-bearing walls and retention walls. The double panel consists of two basic panels, suitably shaped and joined one another by double horizontal connectors creating internally a space to be filled with concrete having suitable characteristics and strength. The thickness of the concrete casting inside the “double panel” as well as the characteristics of the concrete itself will be defined according to the structural needs. Finally, the panel is finished with the application of the external plaster. The double panel, supplied with reinforcement certified by an Official Laboratory in conformity with the Law 5/11/1971 no.1086 - D.M. 9/1/1996, complies with the provisions concerning reinforced concrete structures according to the EUROCODE 2 (EC2)

	Floor panel Panel for the realization of floors and roofing with r.c. joists, giving great advantages as to lightness, insulation and rapidity of assembling. Using the KMG^® floor panel composed of a foam polystyrene shaped plate it is possible to realize floors and roofing of buildings with the addition of supplementary steel inside suitable joists and subsequent cast on site of concrete. In the photograph: panel equipped with reinforcements for the installation phase.

	Stairs panel Panel for a lightweight, resistant staircase of rapid realization. It is made up of a foam polystyrene block, shaped according to design requirements, coated with two layers of steel wire mesh assembled with electro-welded steel wires This panel, suitably reinforced and finished with casting on site in the proper spaces, is used for the realization of flight of stairs to be externally finished with traditional plaster, tiles or whatever material. The stairs panel is characterized by comfortable and rapid installation along with a special lightness and structural resistance.

	Landing panel and bi-directional reinforcements. It gives continuous insulation to the panel intrados. The KMG^® landing panel is an excellent solution for the realization of landings positioned next to the stairs realized with the KMG® stairs panel. The landing panel can also be used for any plate or slab of r.c. to be reinforced in two directions, with the advantage of a weight smaller than a full slab and the presence of a continuous insulating material used also as a form.Panel for the realization of landings, floors

	Angular Double Panel Panel to be used in the combination with the double panel for the realization of the edges. The angular panel completes the range of the double panels, with which load-bearing walls of reinforced concrete are realized.

	Floor Panel (moulded) Panel for the realization of floors and roofing with r.c. joists, giving great advantages as to lightness, insulation and rapidity of assembling. Using the KMG^® floor panel composed of a foam polystyrene shaped plate it is possible to realize floors and roofing of buildings with the addition of supplementary steel inside suitable joists and subsequent cast on site of concrete. In the photograph: panel equipped with reinforcements for the installation phase.